Store in the clip or car cradle
When you do not keep the headset on
your ear, store it in the clip or car
cradle. When the headset is in the clip
or cradle, it is switched off. When you
remove the headset from the clip or
cradle, the headset automatically
switches on.
To place the headset into the clip or
cradle, slide the headset into place
(14). To remove the headset, slide it
out.
Install the car cradle
When you install the cradle in a car,
make sure it does not interfere with or
hinder the steering or braking systems
or other systems used in the operation
of the vehicle (for example, airbags) or
disturb your field of vision while
driving. Check that the deployment of
the airbag is not blocked or impaired
in any way.
To install the car cradle, peel off the
protective sheet from the cradle, and
press the cradle against a flat surface
so that it stays firmly in place. Do not
install the cradle in a place where you
might come in contact with it in the
event of an accident or collision.
Use the car cradle
When you use the headset with the
cradle in a car, obey all local laws.
Always keep your hands free to
operate the vehicle while driving. Your
first consideration while driving
should be road safety. Only operate
the headset or car cradle if it is safe to
do so under all driving conditions.
Periodically check that the adhesive at
the bottom of the car cradle is firmly
attached, especially if the ambient
temperature changes a lot. It is
ENGLISH
recommended that you do not leave
the car cradle inside the vehicle in
direct sunlight or in excessive heat.